What is the difference between matte polishing and high-gloss mirror polishing for stone, and how do the abrasives used differ?
I. Overall Process Differences
Overall Process Differences: Matte Polishing vs High-Gloss & Mirror Polishing
1. Surface Gloss and Texture
High-Gloss Mirror Polishing
- Gloss level (at 60°) ranges from 85° to 105°; offers clear mirror-like reflections and sharp images. The surface is dense and luminous, feeling smooth and cool to the touch. Commonly used for high-end interior finishes, countertops, feature walls, and premium flooring.
Matte (Soft Matte / Antique) Polishing
- Gloss levels fall into three categories: coarse matte (10°–18°), standard soft matte (20°–30°), and fine soft sheen (30°–40°). Reflections are soft and diffused without distinct images; the surface features a uniform, fine matte texture that is anti-glare and slip-resistant. Commonly used for exterior walls, minimalist commercial projects, and flooring in hospitals and schools.

2. Differences in Processing Workflow
Standard High-Gloss Process
- Metal-bond diamond coarse grinding (36#→60#→120#) → Medium-hard resin (200#/400#) → High-density hard/flexible resin (800#→1500#→3000#; add 5000# for luxury stone).
- A process of progressive refinement using increasingly fine-grit pads to continuously smooth out micro-textures until a mirror-like finish is achieved.
Standard Matte Process
- Metal-bond diamond coarse grinding (36#→60#→120#) → 240# grit for transitional smoothing → Matte-specific porous resin pads (240#/400#/600#); process concludes here.
- High-grit polishing pads (1000# and above) are not used; for a rugged, antique look, a nylon fiber brush can be used to treat the surface.
3. Differences in Equipment Operating Parameters
3.1 Pressure
- High-gloss finish: High pressure for granite, low pressure for marble; stable pressure ensures the slab surface is compacted and polished to a shine.
- Matte finish: Overall pressure is slightly lower; excessive pressure can easily create localized shiny streaks, ruining the uniform matte appearance.
3.2 Slab Feed Speed
- Matte finish: Can be slightly faster.
- High-gloss finish: Requires a slow, steady speed to ensure thorough grinding and polishing.
3.3 Water Volume
- Matte finish: Higher water volume to rapidly flush away fine stone dust, preventing the dust from caking on the slab and causing blotchiness.
4. Adhesion of Subsequent Protective Coatings
Matte slab surfaces feature microscopic, fine pores and irregularities, allowing for stronger penetration and adhesion of waterproofing and anti-stain agents; high-gloss, mirror-like surfaces are dense and smooth, making the protective layer more prone to wear and detachment.

(This Resin Frankfurt Abrasive is usd for stone matee polishing)
II. Key Differences in Abrasive Tooling
(Focusing on Frankfurt-style "horseshoe" blocks; includes manual wet polishing pads)
1 Coarse Grinding Stage: Fully Interchangeable
Metal-bond diamond Frankfurt blocks (Grits: 36#, 46#, 60#, 80#, 120#); no difference in the leveling process for matte or high-gloss finishes; function is limited to removing saw marks and achieving uniform thickness/flatness.
2 Major Differences in Medium and Final Polishing Tooling
2.1 Specialized Tooling for High-Gloss/Mirror Finishes
2.1.1 High-Density Resin-Bond Diamond Frankfurt Blocks
Features a compact, high-hardness matrix filled with hard powder materials; high diamond concentration with sharp, wear-resistant particles.
- Grit sizes: 200#, 400#, 800#, 1500#, 3000#, 5000#
- Sub-categories: Hard resin (for granite/engineered quartz); soft/flexible resin (for Turkish marble/luxury stone; designed to protect base color and prevent scratching).
- Function: Fills and smooths scratches layer by layer; increases gloss with successive steps; offers longer service life.
2.1.2 Traditional/Legacy Consumables (Gradually Being Phased Out)
Magnesite polishing blocks; used primarily for the final step on high-end soft stone to enhance luster and richness; largely replaced in mass production by 3000#/5000# resin blocks.
2.1.3 Manual Touch-up/Repair:
- High-gloss resin wet polishing pads (grit range: 80#–5000#).
2.2 Specialized Abrasives for Matte Finishes
2.2.1 Low-hardness, porous resin "Frankfurt" abrasive blocks (Core component)
The resin formula is intentionally designed to be porous and soft, incorporating significant amounts of talc and soft fillers; diamond concentration is lower, and the abrasive grains are selected for toughness to avoid rapidly compacting the slab surface.
- Standardized finishing grits: 240# (coarse antique), 400# (general soft matte), and 600# (fine soft sheen).
- Key point: Do not substitute with high-gloss, dense resin blocks; a hard, dense matrix will inevitably produce a glossy finish with prolonged polishing.
2.2.2 Nylon-abrasive antique-finish fiber brush blocks
- Used in conjunction with matte abrasive blocks to deepen the textured finish and create a natural, antique-style relief effect; these are not used in high-gloss processes.
2.2.3 Manual matte polishing pads:
- Low-hardness resin wet-polishing pads; processing stops at the 400#/600# stage without proceeding to higher grit levels.

(This Resin Bond Diamond Frankfurt Abrasive is used for stone high-gloss mirror polishing)
III. Concise Comparison Table
| Comparison Item | High-Gloss Mirror Polish | Matte/Soft-Matte Polish |
| Final Grit Size | 3000#/5000# (High-grit resin) | 3000#/5000# (High-grit resin) |
| Resin Matrix Structure | Dense, high hardness | Porous, low hardness |
| Porous, low hardness | High concentration of sharp particles | High concentration of sharp particles |
| High concentration of sharp particles | None (Magnesite optional for older methods) | Nylon antique-finish brush |
| Gloss Effect | Highly reflective, clear mirror finish | Low-reflectivity, soft matte/satin finish |
| Abrasive Lifespan | Longer lifespan for the same grit | faster wear for the same grit |
| faster wear for the same grit | Indoor countertops, high-end feature walls, premium flooring | Exterior walls, commercial anti-slip flooring, minimalist soft-glow finishes |
IV. Operational Precautions
- Do not mix high-gloss and matte grinding blocks in the same set; doing so will immediately result in uneven surface finishes (variations in gloss and depth).
- After completing the matte finish, never use high-gloss grinding blocks (grit 800 or higher); this will buff the matte surface to a gloss, effectively ruining the finish.
- When producing a matte finish on soft marble, prioritize using ultra-soft matte resin blocks to prevent the base color from turning whitish and to avoid visible scratches.






