Buff Fickert and Classical Abrasive
Product Overview
Buff Fickert and Classical Abrasive blocks are industrial-grade bonded tooling engineered for calibration, surface smoothing, and precision polishing of granite, marble, engineered quartz, and ceramic tiles. Designed for continuous multi-head polishing lines and heavy-duty bridge machines, these abrasives integrate high-purity minerals (Silicon Carbide, Aluminum Oxide, or Synthetic Diamond) within optimized resin or magnesite bond matrices. They deliver uniform stock removal, predictable scratch pattern reduction, and stable gloss development across high-volume production shifts.
Product Range
|
Category |
Product Series |
Primary Application |
Bond Type |
Available Grit Range |
|
Classical Abrasive |
CF-Magnesite Series |
Granite & Hard Stone Calibration/Grinding |
Magnesite (MgOX) |
F24 - F220 |
|
Classical Abrasive |
CF-Resin Series |
Marble & Limestone Intermediate Smoothing |
Unsaturated Resin |
F120 - F800 |
|
Buff Fickert |
BF-Synthetic Buff |
High-Gloss Final Polishing (Granite & Quartz) |
Polyurethane / Resin Compound |
F800 - F1500 / Ultra-Fine |
|
Buff Fickert |
BF-Leather/Antique |
Textured, Satin, and Leather-Finish Treatments |
Elastomer-Bonded Grit |
Custom Grit (36# to 500# equivalents) |
Technical Specifications
|
Parameter |
Specification |
|
Dimensions |
Standard Fickert length 140 mm or 170 mm base plate configuration. |
|
Backing Plate Material |
Galvanized steel, cast aluminum, or high-density engineering plastic (customized to machine clamping mechanisms). |
|
Abrasive Minerals |
Fused Alumina, Silicon Carbide (Black/Green), Synthetic Diamond. |
|
Density Tolerance |
+/- 0.02 g/cm3 achieved via multi-stage hydraulic press consolidation. |
|
Hardness Grades |
Soft, Medium-Soft, Medium, Medium-Hard, Hard (matched to the Mohs hardness of the target material). |
|
Operating Parameters |
Recommended spindle pressure 1.5 - 2.8 bar; peripheral speed optimized for 35 - 45 m/s. |
Performance Advantages

Controlled Wear Rate
Balanced bond breakdown prevents premature grit shedding while eliminating glazing or loading on hard mineral surfaces.

Consistent Scratch Elimination
Strict adherence to FEPA particle size distribution standards prevents stray deep scratches during transition phases.

Thermal Stability
Formulated resins withstand frictional heat up to 180 deg C without matrix softening or odor emission.

Machine Compatibility
Standardized dovetail geometry fits Breton, Biesse, Gaspari Menconi, Keda, and Barsanti continuous lines without adapter modifications.
Applications
Granite Slab Processing
Stock removal, planar calibration, and mirror-gloss finishing on automated line polishers.
Marble & Limestone Honing
Matte, satin, and honed surface texturing without chemical staining or thermal burning.
Engineered Quartz Buffing
Resin-bonded abrasive finishing designed to eliminate micro-pits and achieve 90 deg + gloss units.
Ceramic Tile Finishing
High-speed calibration and surface smoothing for porcelain and ceramic floor tiles.
Manufacturing Process & Quality Control
Raw Material Grading: Incoming abrasive grains undergo laser particle size analysis; bond powders pass through vibrating mesh separators to eliminate agglomerates.
Batch Weighing & Mixing: Automated weighing systems maintain ratio precision within +/- 1 gram. Dry and wet mixing stages ensure homogeneous mineral distribution within the bond matrix.
Hydraulic Pressing: Multi-stage hydraulic presses apply up to 300 tons of uniform pressure, guaranteeing consistent density across every block.
Thermal Curing: Computer-controlled tunnel kilns regulate precise temperature profiles for resin cross-linking and magnesite crystallization.
Dimensional & Mechanical Inspection: Every production lot undergoes flatness verification on optical surface plates, alongside Rockwell/Shore hardness testing and destructive breaking load checks.

OEM & ODM Customization
Custom Bond Formulation
Optimization of bond hardness and elasticity tailored to specific client feed rates and local water chemistry.
Grit Progression Engineering
Designing customized grit sequences to minimize operating head counts on legacy or specialized polishing lines.
Private Labeling
Laser etching of grit size, batch number, and client logo directly onto the steel or plastic back plate.
Export Packaging
Reinforced master cartons, fumigation-free wooden pallets, and moisture-barrier shrink-wrapping for secure ocean transit.
Why Choose Quanzhou Cheefung
Direct Manufacturing Infrastructure
12,000 m2 production facility featuring 16 automated hydraulic presses and 4 continuous thermal curing lines.
Full Traceability
Laser-etched batch numbers on back plates link directly to raw material test certificates and production timestamps.
Quality Management
ISO 9001 certified manufacturing operations complying with international bonded abrasive safety standards.
Supply Chain Stability
Maintained inventory of standard abrasive formulations ensures 15-day dispatch for recurring container orders.
Frequently Asked Questions

Request a Quote
To receive a formal quotation, technical data sheets, or trial sample evaluation sets, please provide the following details to our engineering sales team:
Target stone type and mineral hardness (Mohs scale)
Machine model and number of polishing heads
Current grit sequence and desired output finish (Gloss Unit target)
Annual consumption volume and port of destination
As one of the most experienced buff fickert and classical abrasive enterprises in China, we are able to meet the needs of the majority of our customers. Please feel free to wholesale advanced buff fickert and classical abrasive made in China here from our factory. For price consultation, contact us.
buff fickert and classical abrasive, Manesite Fickert Abrasive, Spong Fickert Abrasive Tools





