I. Basic Definitions and Specifications
1. Product Positioning
Resin-bond Diamond Frankfurt Abrasive Blocks (horseshoe-shaped resin blocks or Frankfurt Abrasive) are specialized consumables designed for the intermediate polishing, fine polishing, and mirror-finish stages of automated processing lines for marble, travertine, and jade. Applied after the initial coarse grinding (performed by metal Frankfurt blocks) and the transitional grinding (using magnesite Frankfurt/ horseshoe blocks), these blocks determine the stone's final mirror-like gloss and surface smoothness, serving as the core abrasive tools for achieving the finished marble surface.

(Resin Diamond Firkcert for Marble Polishing)
Tips:
To meet market demand, we have developed a range of diamond Frankfurt abrasive blocks featuring composite bonding systems. These products incorporate metal abrasive grains into traditional resin bonds, utilize advanced resin formulations, or integrate other types of abrasives. For simplicity, we collectively refer to them here as "Resin-bond Diamond Frankfurt Abrasive Blocks." Since actual performance is what matters most to the end user, please share your specific grinding and polishing requirements with us; Cheefung will then recommend a high-quality, cost-effective abrasive combination tailored to your needs.
2. Material Structure
- Bonding Matrix: Hot-pressed modified phenolic resin combined with elastic inorganic fillers, providing inherent flexible cushioning; available in two formulations: rigid general-purpose resin (for standard marble) and soft elastic resin (specialized for jade/translucent luxury stone);
- Cutting Medium: Uniformly graded diamond micron powder with a fine particle distribution, ensuring no deep scratches during polishing;
- Standard Dimensions: Universal T105 "Horseshoe" (T3) shape, 106×95×40mm; compatible with the full range of Keda, Breton, and Simec 8/12/16/20-head automatic marble polishing machines; customization available for thicker abrasive layers and special base designs;
- Complete Grit Range (Mid-to-final polishing stages only; excludes coarse grinding grits)
#120, #180, #240, #320, #400, #600, #800, #1500, #3000,
Buff (High-gloss finishing block)

(Resin Frankfurt Dimensional Diagram)
3. Standard Marble Polishing Process Flow
- Metal bond Diamond Frankfurt Abrasive (#24–#320 coarse grinding & leveling) →
- Magnesite Bond Diamond Frankfurt Abrasive (#120–#400 economical intermediate transition grinding) →
- Resin bond Diamond Frankfurt Abrasive (#600–#3000 mirror-finish polishing)
II. The Six Core Advantages of Cheefung Frankurt Blocks
1 Flexible resin matrix; scratch-free polishing; high mirror-like gloss
- The resin's inherent elastic cushioning prevents the deep, coarse scratches often caused by metal abrasive blocks;
- progressive grinding results in a fine, uniform surface finish;
- Gloss levels reach 90–105° after the #3000/Buff stages;
- Light-colored marble and jade are less prone to mottling, color inconsistency, or white spots, significantly increasing the yield rate for high-end countertops and decorative slabs.
2 Optimized for soft luxury stones; prevents edge chipping and scratching
- Features a custom soft-elastic resin formula designed specifically for porous, brittle stones like Onyx, travertine, and limestone.
- It applies gentle grinding pressure without tearing the stone's surface, making it the ideal diamond consumable for the finishing of translucent luxury stones.
3 Service life far exceeds that of magnesite (Sorel cement) blocks, reducing downtime for replacements
- When processing standard 20mm(18mm) marble slabs with adequate water cooling, a single unit processes 18,000–30,000 m²-a lifespan 10 to 18 times longer than magnesite blocks-significantly cutting labor costs and production losses associated with frequent replacements.
4 Gentle heat dissipation; prevents stone scorching and surface discoloration
- The resin offers moderate thermal conductivity, ensuring low temperature rise during prolonged continuous polishing.
- This prevents scorch marks or dark stains on light-colored beige or white marble, allowing for stable processing even with reduced water cooling.
5 High versatility; suitable for a wide range of stone types
- One set of consumables is compatible with standard marble, travertine, terrazzo, engineered stone, epoxy-repaired slabs, and moderately hard marble.
- Stone processing plants can meet all finished-product polishing needs by stocking just this single product category.
6 Balanced cost-performance ratio; supports full OEM customization
- Unit purchase price is lower than metal Frankfurt blocks, while polishing results are far superior to magnesite blocks.
- Customization options include resin hardness, product color, and private labeling;
- one-stop supply is available, combining these with metal and magnesite Frankfurt blocks.

(Our luxury stone Diamond Frankurt block easily achieves high gloss effect)
III. Inherent Product Limitations
- Incapable of heavy-duty rough grinding: Due to the relatively low hardness of the resin matrix, it cannot remove significant thickness variations or deep saw marks from raw slabs; it cannot replace metal Frankfurt abrasives for #36/#60 rough grinding/calibration.
- Lower heat resistance than metal-bonded abrasives: The resin is prone to aging and pulverization under conditions of water shortage, ultra-high speeds, or continuous 24-hour heavy-duty operation; a reliable supply of circulating cooling water is mandatory.
- Shorter overall lifespan than metal Frankfurt abrasives: The lifespan of a single segment is approximately half that of the metal version; large factories processing thick slabs or high-hardness marble should still use metal grinding blocks for the rough grinding stage.
* For specific problems, please analyze them in detail. If you have any questions, please consult cheefung customer service personnel.
IV. Suitable & Prohibited Applications
Suitable Stone Materials
- Various beige, grey-white, and black marbles, travertine, limestone, terrazzo, engineered marble, epoxy-repaired slabs, translucent onyx, soft luxury stones, and finished countertop slabs.
Compatible Equipment
- Fully automatic marble continuous polishing lines (e.g., Keda, Breton, Simec) and automatic bridge-type slab grinding machines; compatible with standard T105 "Frankfurt/ horseshoe" clip-on bases-no machine head modification required.
Prohibited Applications
- Initial rough grinding of raw slabs with significant thickness variations or uneven surfaces;
- Dry grinding operations without cooling water;
- Exclusive use for rough processing of thick, high-hardness marble (results in low efficiency and accelerated wear).

(Diamond Frankurt-Fickert Abrasive Abrasive)
V. Comparison of Key Parameters for Three Types of Frankfurt Abrasive Blocks
| Category | Resin Bond Diamond Frankfurt | Metal Bond Diamond Frankfurt | Magnesite Frankfurt |
| Key Process | #600–#3000 Medium/Mirror Polishing | #24–#320 Rough Grinding & Thickness Calibration | #120–#400 Economical Medium Grinding/Transition |
| Processing Area per Piece (#60 Marble) | 18,000–30,000 m² | 35,000–52,000 m² | 1,200–3,500 m² |
| Finish Quality | Fine, mark-free, high mirror gloss | Strong cutting action, deep scratch pattern | Moderately fine, cost-effective transition |
| Suitable Stone | Marble, jade, and travertine finishing | Hard marble, thick slab rough grinding | Small-to-medium marble plants with limited budgets |
| FOB Bulk Unit Price (T105 Standard) | $12–$20/pc | $18–$28/pc | $2–$5/pc |
Ⅶ. Some questions that you may be concerned about
Q1: What is the service life of resin bond diamond frankfurt?
A: Tested under standard 20mm marble slab with full circulating water cooling: Medium grit #120–#600: 18,000–24,000 ㎡ per block Fine & mirror grit #800–#3000/Buff: 22,000–30,000 ㎡ per block Our upgraded anti-aging resin formula extends lifespan by 15%–20%. Service life will drop obviously without enough cooling water or polishing hard marble with thick epoxy layers.
Q2: What's the difference between resin, metal and magnesite frankfurt blocks?
A: Metal bond frankfurt owns super strong cutting power and longest lifespan for rough slab leveling; resin bond frankfurt features flexible elastic matrix to produce scratch-free high-gloss finish for fine polishing, ideal for luxury onyx; magnesite frankfurt is low-cost economical medium grinding abrasive for small marble factories. They must be matched together to complete a full marble polishing sequence.
Q3: Can resin bond frankfurt polish luxury onyx stone?
A: Yes, we supply customized soft elastic resin formula frankfurt exclusively for fragile onyx, travertine and limestone. It polishes gently without deep scratches or edge breakage, the perfect choice for luxury stone mirror finishing.
Q4: Does T105 resin frankfurt fit all Keda automatic marble polishing machines?
A: Absolutely. Our universal T3/T105 horseshoe base with standard mounting holes matches all Keda 8/12/16/20-head marble continuous polishing lines directly, no machine modification needed. Custom non-standard sizes are available for bulk orders.
Q5: What grit sequence uses resin bond frankfurt on marble line?
A: Standard full polishing flow: Metal bond frankfurt #36/#60/#120 → Magnesite frankfurt #240/#400 → Resin bond frankfurt #800/#1500/#3000/Buff for final mirror gloss finishing. Do not skip grit sizes to avoid residual scratches on slab surface.

Cheefung Company has many years of experience in manufacturing Stone Abrasive tools. If you are looking for high-quality Diamond Fickert/ Frankfurt Abrasive, please feel free to contact us. Cheefung, Professional, dedicated to stone grinding tools.






